Japanese user guide for Elite Screens Manual Series pull-down projection screens: wall mounting, chain hanging, operation, maintenance and size tables.
This Japanese user guide covers the Elite Screens Manual Series of manual pull-down projection screens. It explains how to unpack and handle the screen, how to mount the case on a wall with screws, and how to hang the screen from a ceiling using a chain (chain not included).
The guide then describes how to pull the screen down and let it retract, how to clean the screen material, and it ends with size tables in millimeters and inches listing case length, screen width, viewing area, weight bar length and other dimensions for each model. This manual is written in Japanese.
| Case length (A), M84H 84" 16:9 | 2085 mm |
|---|---|
| Case length (A), M170S 170" 1:1 | 3244 mm |
| Screen material to wall distance (C1) | 20 mm |
| Dimension tolerance (mm table) | ±2.5 cm |
| Wall gap when mounting | About 3 mm |
| Pull-down distance before retracting | At least 5 cm |
Align the case with the mounting location and mark the drill holes, drill the holes and insert screws leaving about a 3 mm gap from the wall, then hang the case by the keyholes on the left and right end caps.
Yes, it can be hung with a chain, which is not included; 71 to 120 inch models use a chain loop on the end cap, while 135 to 170 inch models use the holes in the ears of the end cap.
Pull the screen down at least 5 cm, operate it perpendicular to the case and do not let go until it is fully retracted.
Clean it with a soft cloth dampened with mild detergent diluted in water, and store it in the case when not in use.