EDAC 516 series connector assembly datasheet covering 20-120 contact sizes, materials, ratings, PC tail layouts, cut-out and cover dimensions.
This four-sheet EDAC 516 assembly drawing covers the connector in 20, 38, 56, 90 and 120 contact sizes. It lists features including .150 (3.81) contact spacing, staggered grid plug and receptacle, hermaphroditic contact mating, crimp, P.C. tail, wire hole and wire wrap terminations, actuating screws, and optional plastic or metal covers with side or top entry cable clamps.
The specifications list diallyl phthalate or thermoplastic polyester insulators, phosphor bronze contacts with gold over nickel plating, an 8.5 ampere current rating, 10 milliohm maximum contact resistance, 2000 V AC rms dielectric withstanding voltage, 5000 megohm minimum insulation resistance, and a -65 to +125 degrees C operating temperature. The remaining sheets give P.C. tail layouts, cut-out panel dimensions, and cover dimensions for the different contact counts.
| Contact Spacing | .150 (3.81) |
|---|---|
| Row Spacing | .130 (3.30) or .150 (3.81) |
| Contact Sizes | 20, 38, 56, 90 or 120 |
| Insulator Material | Diallyl Phthalate or Thermoplastic Polyester, UL94V-0, green; or polycarbonate, grey |
| Contact Material | Phosphor Bronze Alloy CA-510 |
| Contact Plating | Gold over Nickel for Entire Contact |
| Current Rating | 8.5 Amperes |
| Contact Resistance | 10 Milliohms Maximum |
| Dielectric Withstanding Voltage | 2000 V AC rms at sea level |
| Insulation Resistance | 5000 Megohms Minimum |
| Operating Temperature | -65 to +125 Degrees C |
| Cover Material | Polycarbonate, Colour: Green, or Die-Cast Zinc, Grey Enamel Paint |
The connector is available in 20, 38, 56, 90 or 120 contact sizes.
The current rating is 8.5 amperes.
Contact termination options include crimp, P.C. tail, wire hole and wire wrap.
The operating temperature range is -65 to +125 degrees C.