EDAC 802 series high-temperature card edge connectors: .050 in pitch, dual row, PPS insulator, gold/tin plating options, and ordering codes.
EDAC 802 series high-temperature card edge connectors are .050 in (1.27 mm) pitch, dual-row connectors with a .551 in (14 mm) high UL94V-0 thermoplastic PPS insulator. The document lists electrical and mechanical specifications, contact plating and termination options, mounting options, and ordering codes.
The specifications include a 1 A current rating, 30 milliohm maximum contact resistance, 500 VAC dielectric withstanding voltage, 1,000 megohm minimum insulation resistance, and an operating range of -55 C to +105 C. It also gives insertion and withdrawal forces and recommended PCB layouts for contact codes 21 and 58.
| Contact spacing | .050 in (1.27 mm) |
|---|---|
| PC board thickness accepted | .062 in (1.57 mm) nominal |
| Insulator body height | .551 in (14 mm) |
| Insulator material | UL94V-0 thermoplastic PPS, black |
| Contact material | Copper alloy |
| Contact plating | Selective gold on mating area; tin on solder tail; nickel underplating all over |
| Current rating | 1 A |
| Contact resistance | 30 milliohms maximum |
| Dielectric withstanding voltage | 500 VAC rms, 60 Hz, 1 minute |
| Insulation resistance | 1,000 megohms minimum |
| Operating temperature | -55 C to +105 C |
| Insertion force | 230 g maximum per contact pair |
| Withdrawal force | 15 g minimum per contact pair |
| Contact rows | Dual row |
| Plating options | 2 Gold Flash; 3 15 microinches gold; 6 30 microinches gold |
The operating temperature range is -55 C to +105 C.
The current rating is 1 amp.
The insulator is UL94V-0 thermoplastic PPS in black.
The listed plating options are 2 Gold Flash, 3 15 microinches of gold, and 6 30 microinches of gold.