Creality CR-10 Series (CR-10/CR-10S/CR-10 S4/CR-10 S5) 3D Printer User Manual

User manual for Creality CR-10 Series 3D printers, covering parameters, installation, cable connection, screen menus, software setup, and first printing.


Creality CR-10 Series (CR-10/CR-10S/CR-10 S4/CR-10 S5) 3D Printer User Manual - cover page
Brand
Creality
Category
Printer
Document type
User Manual
Language
English
Pages
16
File format
PDF
File size
5.7 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
9256C95DA95009F30C888A623789D2CB

About this manual

This user manual is for the Creality CR-10 Series of 3D printers and is also applicable to the CR-10S, CR-10 S4, and CR-10 S5; the CR-10 mini is noted as lacking the T-Bracket (Right) and Decoration Strip. It covers basic parameters, the general parts list, device installation, cable connection, screen information, loading filament, platform adjustment, software installation, and the first print. Detailed instructions are said to be available on the TF card.

The listed specifications include FDM molding, a single nozzle, 0.1-0.4 mm slice thickness, 1.75 mm PLA filament, STL/OBJ/AMF file support, and online or TF-card offline working mode. The manual also gives safety notes, screen menu explanations, slicing and printing steps, and after-sales service terms including a one-year warranty and lifetime maintenance.

What's inside

  • Basic Parameters
  • General List
  • Device Installation
  • Cable Connection
  • Screen Information
  • Loading Filament
  • Platform Adjustment
  • Software Installation
  • First Printing
  • After-Sales Service

Specifications

ModelCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10mini
Printing SizeCR-10/CR-10S: 300*300*400mm; CR-10 S4: 400*400*400mm; CR-10 S5: 500*500*500mm; CR-10mini: 300*220*300mm
Molding TechnologyFDM
Nozzle Number1
Slice Thickness0.1mm-0.4mm
Nozzle DiameterStandard 0.4mm
Filament1.75mm PLA
File FormatSTL/OBJ/AMF
Working ModeOnline or TF card offline
Slice SoftwareCreality Slicer/Cura/Repetier-Host/Simplify3D
Power SupplyInput: AC 115V/230V 50/60Hz; Output: DC 12V
Total Power270W (CR-10, CR-10S, CR-10 S5, CR-10mini); 250W (CR-10 S4)
Bed Temperature≤100℃ (CR-10, CR-10S, CR-10mini); ≤60℃ (CR-10 S4, CR-10 S5)
Nozzle Temperature≤250℃
Printing Speed≤180mm/s, Normal 30-60mm/s
Operating SystemWindows XP/Vista/7/8/10, MAC/Linux
Resume PrintNo (CR-10, CR-10mini); Yes (CR-10S, CR-10 S4, CR-10 S5)

Frequently asked questions

Which additional models is the manual applicable to?

It is also applicable for the CR-10S, CR-10 S4, and CR-10 S5.

What filament diameter and material are specified?

The listed filament is 1.75mm PLA.

Which slicing software is listed?

Creality Slicer, Cura, Repetier-Host, and Simplify3D are listed.

What warranty and maintenance terms are stated?

The manual states a one-year warranty and lifetime maintenance.

Download PDF (5.7 MB)

More Creality Manuals


View all Creality manuals →