User manual for Bently Nevada's radiation-resistant piezoelectric velocity sensor, model 330530, for measuring absolute vibration in gamma radiation…
This document provides technical specifications and installation guidance for the Bently Nevada 330530 radiation-resistant velocity sensor. It is a solid-state piezoelectric accelerometer with embedded electronics, designed for mounting at any angle and operating in gamma radiation environments. The manual includes electrical, environmental, and physical specifications, as well as ordering information and accessories.
Key features include a frequency response of 6.0 Hz to 2.5 kHz, a velocity range of 420 mm/s peak post-radiation, and a hermetically sealed stainless steel case. The sensor is suitable for monitoring bearing housing vibration and is not intended for control loop applications or neutron radiation environments. This manual is written in Russian.
| Pre-Radiation Electrical Sensitivity | 3.94 mV/mm/s (100 mV/in/s) ± 5% |
|---|---|
| Post-Radiation Electrical Sensitivity | 3.94 mV/mm/s (100 mV/in/s) ± 10% @ 3 Mrads |
| Frequency Response | 6.0 Hz to 2.5 kHz (360 cpm to 150 kcpm) ± 0.9 dB |
| Operating Temperature Range | -55 °C to +121 °C (-67 °F to +250 °F) |
| Maximum Cable Length | 305 metres (1,000 feet) |
| Weight | 142 grams (5.0 ounces) |
| Diameter | 25.3 mm (0.995 in) |
| Height | 63.5 mm (2.5 in) |
| Case Material | 304L stainless steel |
| Connector | 2-pin MIL-C-5015 hermetically sealed, 304 stainless steel |
The frequency response is 6.0 Hz to 2.5 kHz (360 cpm to 150 kcpm) ± 0.9 dB.
The maximum guaranteed radiation dosage is 12.0 Mrads.
The output bias voltage is -12.0 ± 1.0 V at room temperature.
The maximum mounting torque is 4.52 N-m (40 in-lbf).