Becker O 5.10 vacuum pump operating instructions covering oil types and fill quantities, electrical connection, maintenance intervals and technical data.
These are the operating instructions for the Becker O 5.10 vacuum pump, issued by Gebr. Becker GmbH in Wuppertal, Germany. The document covers two versions: Type 1 with a short oil tank and Type 2 with a long oil tank. It includes mounting and ambient conditions, oil types and quantities, the electrical connection and the maintenance schedule.
The pages are largely diagram-based and use short labels with multilingual headings. They show permitted ambient temperature and installation altitude, the type plate layout, the oil fill limits for each tank type, the single-phase electrical connection with cable lengths up to 2 m and from 2 m to 10 m, and the maintenance points for intake air, ambient air and oil changes. This manual is written in German.
| Weight, Type 1 | 17 kg (37.5 lbs) |
|---|---|
| Weight, Type 2 | 18.5 kg (41 lbs) |
| Oil quantity, Type 1 | max. 0.3 liter |
| Oil quantity, Type 2 | max. 0.5 liter |
| Sound pressure level at 50 Hz | 58.5 dB(A) |
| Sound pressure level at 60 Hz | 64 dB(A) |
| Ambient temperature range | above 5 °C / 41 °F and below 40 °C / 104 °F |
| Maximum starting frequency | 12 times per hour |
| Oil change intervals | 1st = 500 h, 2nd = 2000 h, 3rd = 4000 h |
The oil table lists Becker Lube in the grades M, S, SL and SM in viscosity 32 and 68, chosen according to ambient temperature. The document gives article numbers for the 1 l, 5 l, 0.5 l and 0.25 l containers.
Type 1 with the short oil tank takes a maximum of 0.3 liter and Type 2 with the long oil tank a maximum of 0.5 liter.
The maintenance page lists the first oil change at 500 h, the second at 2000 h and the third at 4000 h.
The document shows a 1-phase standard connection with a cable length of up to 2 m, and a different arrangement for more than 2 m up to 10 m. A capacitor with Faston 6.3 terminals is shown in the connection diagram.