This guide provides safety procedures, operational instructions, interface details, and maintenance information for the AOC NANO laser.
The document outlines the safety responsibilities, laser class classification, and required protective measures for operating AOC NANO lasers. It details hazard warnings, required personal protective equipment, and safe work area setup to prevent accidental exposure.
It also describes the laser’s electrical and environmental specifications, interface connectors (INTERLOCK, RS232), optional accessories, and software control interfaces. Step‑by‑step start‑up and shut‑down procedures, control methods, and a self‑diagnosis system are included to aid users in routine operation and troubleshooting. This manual is written in Chinese.
| Supply Voltage | DC‑24V |
|---|---|
| Maximum Power | 450 W |
| Operating Temperature Range | 5 °C – 40 °C |
| Relative Humidity Range | 5 % – 90 % (no condensation) |
| Cooling Capacity | 300 W |
| Water Pump Head | 10 m – 20 m |
| Water Flow Rate | 4 L/min @ 0.18 MPa |
| Temperature Control Accuracy | ±0.1 °C |
Operators must wear appropriate protective goggles, gloves, and protective clothing, and follow the laser safety procedures described in the manual.
The laser requires a DC‑24 V supply and has a maximum operating power of 450 W.
The INTERLOCK connector has two pins; when the pins are disconnected, the laser stops and an alarm is triggered.