DS6MX-CHI is a 6-zone keyboard that can be used independently or connected to DS7400XI-CHI alarm host. It supports multiple zone programming modes and wireless functions.
The DS6MX-CHI is a 6‑zone security keypad that can operate independently or connect to a DS7400XI‑C HI alarm host for residential or commercial protection. It supports wired and wireless zones, a tamper switch, and programmable outputs.
The guide covers mechanical installation, wiring diagrams for zones, relay and solid‑state outputs, external arm/disarm switches, programming procedures, wireless receiver configuration, test mode, fault monitoring and address configuration for bus connections. This manual is written in Chinese.
| Size | 11.8 cm × 12.4 cm × 3 cm |
|---|---|
| Weight | 500 g |
| Operating Temperature | -20 °C ~ +50 °C |
| Operating Humidity | 0 % ~ 85 % (non‑frost) |
| Working Voltage | DC 8.5 V ~ 15 V |
| Standby Current | 30 mA |
| Alarm Current | 100 mA |
| Programmable Output Current | 500 mA |
| Relay Output | 3 A @ 28 VDC (NO/NC) |
| Zone Response Time | 500 ms |
| Line Termination Resistance | 10 kΩ |
| Tamper Switch | Built‑in |
Press and hold the [*] key for 3 seconds; the keypad will beep and the zone LEDs will flash, indicating programming mode.
Turn off power, set jumper J1, turn power back on, then remove jumper J1.
The receiver can be installed up to 20 meters away from the DS6MX‑CHI keypad.