4B Binswitch Elite BSE1V10C/BSE2V10C Capacitance Point Level Sensor Installation Instructions

4B Binswitch Elite BSE1V10C and BSE2V10C capacitance point level sensor installation instructions with wiring diagrams, calibration and troubleshooting.


4B Binswitch Elite BSE1V10C/BSE2V10C Capacitance Point Level Sensor Installation Instructions - cover page
Brand
4B
Category
sensor
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
920 KB
Published
06 November, 2026
Updated
06 November, 2026
MD5 checksum
1F4C1610C89F4C19490FB30D9C8340AA

About this manual

The 4B Binswitch Elite is a capacitance point level sensor, part numbers BSE1V10C and BSE2V10C, that detects level or plug situations for bulk granular solids or liquids in tanks, bins or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs. The sensor is fully encapsulated in a 30 mm diameter nylon body and operates by detecting capacitance change when material is present; a user selectable relay output can be magnetically calibrated to be normally energized or de-energized.

The document opens with customer safety responsibilities, then gives a product overview, specifications and dimensions, installation with three mounting methods (SMP mounting plate, BMPG36 mounting gland and BAS abrasion shield), and wiring diagrams for the 5-wire BSE1V10C and the 2-wire BSE2V10C. It closes with sensor calibration, testing and commissioning, a troubleshooting guide, Binswitch accessories and product warranty information.

What's inside

  • Customer Safety Responsibilities
  • Product Overview
  • Specifications
  • Dimensions
  • Installation
  • Wiring Diagrams
  • Sensor Calibration
  • Testing & Commissioning
  • Troubleshooting Guide
  • Binswitch Accessories

Specifications

Power Supply (BSE1V10C)24 to 240 VAC or 12 to 240 VDC
Power Supply (BSE2V10C)24 to 240 VAC/VDC (universal supply)
Operating Temperature-13°F (-25°C) to 158°F (70°C)
Sensing Range1 inch (25 mm) maximum
Output (BSE1V10C)Relay rated 240 VAC 3A maximum
Output (BSE2V10C)FET rated 200 mA maximum
CableBSE1V10C: 6 ft. (2 m) 5 wire; BSE2V10C: 6 ft. (2 m) 2 wire
Enclosure / ProtectionNylon, IP65
ApprovalsCSA Class II Division 1 Groups E, F and G (USA & Canada)
Dimensions6-1/8 in. (155 mm) long, 1-3/16 in. (30 mm) diameter, M30 x 1.5 x 10 mm threads

Frequently asked questions

What is the maximum sensing range of the Binswitch Elite?

The maximum sensing range is 1 inch (25 mm).

How far must the end of the sensor be from the bin wall?

The end of the sensor must be at least one inch from the bin wall or other metalwork.

What supply voltage does the BSE2V10C use?

The BSE2V10C uses a 24 to 240 VAC/VDC universal supply, and its load must have the same voltage rating as the supply.

What safety step is required before installation?

Always lockout and tagout machinery prior to installation.

Download PDF (920 KB)

More 4B Manuals


View all 4B manuals →