This manual introduces the detailed information on installation, use and maintenance of forced draft gas burner RS70-100-130.
This manual provides the complete set of instructions for installing, commissioning, operating and maintaining the RS70‑100‑130 forced‑ventilation gas burner. It includes technical parameters, component descriptions, wiring diagrams, adjustment procedures and safety checks.
The document also covers troubleshooting, control‑box diagnostics, and optional accessories such as gas‑valve groups and status panels, helping technicians keep the burner running reliably in industrial boiler applications. This manual is written in Chinese.
| Maximum output power (RS70) | 465‑814 kW |
|---|---|
| Minimum output power (RS70) | 192 kW |
| Fuel type | Natural gas (G20‑G25) |
| Electrical supply | 230‑400 V, three‑phase |
| Maximum gas‑pressure during full load | 10.3 mbar (RS70) |
The minimum gas pressure for the RS100 model is 5 mbar.
Press and hold the reset button for 1‑3 seconds, then release; the burner will restart after a short pause.
Rotate screw 4 until the scale aligns with the front surface of the flange, then tighten the three adjustment screws.
The factory preset voltage is 400 V; for a 230 V supply, rewire the motor from star to delta and adjust the thermal relay.