This one-page Sharp leaflet presents the XV-Z3000 High-Definition DLP Home Theatre Projector. It lists the projector's specifications, including the 0.65" Digital Micromirror Device by Texas Instruments, 983,040 pixels (1,280 x 768), HDTV and computer signal compatibility, lens and projection size, brightness and contrast ratio, input terminals, power requirements, fan noise, lamp type and lamp life, dimensions and weight.
The sheet also gives outline dimensions in millimeters for the front, top, back and side views, and names the supplied accessories (lens cap, power cord and phosphorescent remote control) together with optional accessories such as the AN-100LP lamp, AN-TK201/AN-TK202 ceiling mounts, AN-60TK installation adaptor, AN-A1RS RS-232C adaptor and AN-C3CP2 3-RCA to 15-pin D-sub cable. A note says some optional accessories may vary by region.
| DMD chip | 0.65" Digital Micromirror Device (DMD) x 1 by Texas Instruments |
|---|---|
| Number of pixels | 983,040 pixels (1,280 x 768) |
| Resolution | 720 TV lines (DTV 720P input), 520 TV lines (video input) |
| HDTV compatibility | 1080i (in intelligent compression), 720P, 576P, 576i, 480P, 480i |
| Computer RGB input signals | XGA, SVGA, VGA, Mac 19"/16"/13" |
| Video colour systems | NTSC/NTSC4.43/PAL/PAL(60Hz)/PAL-M/PAL-N/SECAM |
| Lens | 1:1.15 manual zoom and focus |
| Projection size | 40" - 300" |
| Projection distance | 3.0 - 3.45 m for 16:9 wide 100" screen |
| Luminance | 1,200 ANSI Lumen (in High-Brightness Mode) |
| Contrast ratio | 6,500:1 (in High Contrast Mode) |
| Input terminals | 3RCA (component) x 2, RCA video x 1, S-video x 1, HD-15 (RGB/component) x 1, HDMI x 1 |
| Power source | AC 100-240 V, 50/60 Hz (multi-voltage) |
| Power consumption | 355 W (standby 6.6 W) with AC 100 V |
| Fan noise | 33 dB (Standard Mode), 30 dB (Low Power Mode) |
| Projection lamp / lamp life | 275 W (SHP); 3,000 hours (Low Power Mode) |
| Dimensions (W x H x D) | 315 x 120 x 294 mm (including adjuster legs and lens) |
| Weight | 4.0 kg (including adjuster legs and lens) |
| Supplied accessories | Lens cap, power cord, phosphorescent remote control |
The leaflet lists a 6,500:1 contrast ratio in High Contrast Mode.
The 275 W (SHP) lamp is rated at 3,000 hours in Low Power Mode.
The AN-100LP lamp, the AN-TK201 and AN-TK202 ceiling mounts, the AN-60TK installation adaptor, the AN-A1RS DIN-D-sub RS-232C adaptor and the AN-C3CP2 3-RCA to 15-pin D-sub cable.
A lens cap, a power cord and a phosphorescent remote control are supplied.