This manual explains how to connect the speakers, select audio sources, and use the remote control for the Philips MCM108 Micro Hi-Fi System. It covers basic functions such as power on/off, volume adjustment, source selection (CD, TUNER, AUX), and timer/clock settings.
Additional sections describe CD and MP3 playback, tuner operation, maintenance procedures, technical specifications, and warranty information. Safety warnings and cleaning instructions for the laser head and chassis are also included. This manual is written in Chinese.
| Output Power | 2 × 2 W RMS, 200 W PMPO |
|---|---|
| Signal‑to‑Noise Ratio | ≥ 62 dBA (IEC) |
| Frequency Response | 60 – 16000 Hz, ± 3 dB |
| Speaker Impedance | 8 Ω |
| Headphone Impedance | 32 Ω – 1000 Ω |
| CD Player Frequency Range | 20 – 20000 Hz |
| FM Band | 87.5 – 108 MHz |
| MW Band | 531 – 1602 kHz |
| Total Harmonic Distortion | ≤ 5 % |
| Standby Power Consumption | < 3 W |
Open the battery compartment, remove the old CR2032 cell, insert a new CR2032 battery and close the compartment.
Connect the speaker wires to the SPEAKERS terminals, matching the right speaker to the RIGHT terminal and the left speaker to the LEFT terminal, observing the + (red) and – (black) polarity markings.
Press the PROG/CLOCK key while in standby mode, then use the ± buttons to adjust hours and minutes, confirming with the PROG/CLOCK key.
Use Philips‑branded CD laser‑head cleaning fluid or a comparable commercial cleaner, following the product’s usage instructions.