The document provides installation instructions for Dell UPS products.
This two-page Dell document gives instructions for installing the optional power cord on certain Dell UPS models. It opens with a warning that electrical installation must be performed only by qualified service personnel such as a licensed electrician, that utility power must be switched off at the distribution point where the UPS will be connected, and that the UPS user's manual should be consulted for more information.
The sheet lists the UPS models that accept the optional power cord (MRVDY at 4200W, 208 Vac; 913CC at 3750W, 4200W or 5600W, 230 Vac; 6WWDY at 4200W or 5600W, 230 Vac) and notes that the cord must not be used with the 5600W Online UPS. A wiring table gives terminal positions for input ground (G), neutral (N L2/Neutral In) and line (L L1/Line In), with a terminal wire size rating of 5.26–16 mm2 (10–6 AWG) and a tightening torque of 2.26 Nm (20 lb in). The same information is repeated in French, German, Spanish, Chinese, Japanese, Korean and Russian.
| Terminal wire size rating | 5.26–16 mm2 (10–6 AWG) |
|---|---|
| Terminal tightening torque | 2.26 Nm (20 lb in) |
| Input terminal positions | G = Ground, N L2/Neutral In, L L1/Line In |
| Power cord model MRVDY | 4200W, 208 Vac UPS |
| Power cord model 913CC | 3750W, 4200W or 5600W, 230 Vac UPS |
| Power cord model 6WWDY | 4200W or 5600W, 230 Vac UPS |
Only qualified service personnel, such as a licensed electrician, shall perform the electrical installation because of the risk of electrical shock.
The MRVDY 4200W, 208 Vac UPS; the 913CC 3750W, 4200W or 5600W, 230 Vac UPS; and the 6WWDY 4200W or 5600W, 230 Vac UPS.
No. The document states that the cord is not for use with the 5600W Online UPS.
The terminal wire size rating is 5.26–16 mm2 (10–6 AWG) and the tightening torque is 2.26 Nm (20 lb in).