The Dell™ PowerVault™ NX3100 Systems Getting Started With Your System Guide introduces the features and benefits of the system.
This guide explains how to prepare the Dell PowerVault NX3100 system for use. It covers unpacking the system, assembling the rails and installing the system in a rack, connecting the keyboard, mouse, monitor, and power cables, securing the power cables, turning on the system, and installing the optional bezel.
The system ships with Microsoft Windows Storage Server 2008 (x64) Edition preinstalled. The document also lists technical specifications, including processor, expansion bus, memory, drives, optical drive, connectors, and video hardware, and points to the Hardware Owner's Manual and support.dell.com for additional information.
| Regulatory model | E13S Series |
|---|---|
| Supply voltage | 100–240 V CA |
| Frequency | 50/60 Hz |
| Current consumption | 7.5–4.0 A |
| Processor type | Two Intel Xeon processors 5500 or 5600 series |
| Bus type | PCI Express Generation 2 |
| Memory architecture | 1066 or 1333 MHz DDR3 registered or unbuffered ECC DIMMs |
| Memory module sockets | Eight 240-pin |
| Memory module capacities | 1 GB, 2 GB, 4 GB, or 8 GB |
| Minimum RAM | 1 GB with a single processor (one DIMM per processor) |
| Maximum RAM | 64 GB (8 GB dual- and quad-rank DIMMs) |
| Hard drives | Up to twelve 3.5-inch or 2.5-inch, hot-swappable SAS, SATA, or SSD drives and up to two cabled 2.5-inch SAS drives |
| Optical drive | External USB DVD-ROM |
| Back NIC | Two RJ-45 (for integrated 1 GB NICs) |
| USB | Two 4-pin, USB 2.0-compliant (back); One 4-pin, USB 2.0-compliant (front); Two 4-pin, USB 2.0-compliant (internal) |
| Video type | Matrox G200, integrated in the BMC |
| Video memory | 8 MB |
| Preinstalled operating system | Microsoft Windows Storage Server 2008 (x64) Edition |
Unpack the system, assemble the rails, and install the system in the rack following the safety instructions and the rack installation instructions provided with the system.
The system is preinstalled with Microsoft Windows Storage Server 2008 (x64) Edition.
Connect the system's power cable(s) to the system, connect the monitor's power cable if a monitor is used, secure the system power cable to the bracket with the provided strap, and plug the other end into a grounded electrical outlet or a separate power source such as a UPS or PDU.
The Hardware Owner's Manual provides information about system features and describes how to troubleshoot the system and install or replace system components. It is available online at support.dell.com/manuals.