The Dell™ PowerVault™ Data Protection Solutions Storage Expansion Guide provides information on how to expand storage.
This Dell PowerVault Data Protection Solution Storage Expansion Guide (Rev. A00, November 2007) explains how to add storage when backup needs outgrow the capacity of a PowerVault data protection solution running Microsoft System Center Data Protection Manager (DPM) 2007. It covers planning additional disk storage, RAID adapter considerations, choosing disk sizes, using hot spares, and installing Dell OpenManage Server Administrator.
The document then describes adding physical disks and RAID adapters for external storage, installing external storage enclosures, creating virtual disks and hot spares with OMSA and adding them to the DPM storage pool, and using supported tape drives and tape libraries with DPM. Worked examples are based on a PowerVault DP500 solution with six internal disks protecting an Exchange Server; a closing chapter lists related Microsoft and Dell documents. This manual is written in Chinese.
| RAID configuration recommended for DPM | RAID 5 |
|---|---|
| Maximum physical disks per RAID 5 disk group (recommended) | 8 |
| Example usable capacity | Five 250 GB drives provide 1 TB |
| External RAID adapter used in the example | PERC 6/E |
| Hot spare types | Global or dedicated |
RAID 5 is the only configuration recommended for use with DPM; it is described as offering the best cost, performance and reliability for this configuration type.
The guide recommends a maximum of eight physical disks per RAID 5 disk group.
Dell OpenManage Server Administrator (OMSA) must be installed on the DPM server, and the Storage Management option should be selected during installation.
The example administrator attaches a PowerVault MD1000 storage enclosure, which requires an external RAID controller such as the PERC 6/E.