The Dell™ PowerEdge™ 800 System User's Guide describes the features and characteristics of the system.
This document is the French-language user guide for the Dell PowerEdge 800 server. It covers system overview, Dell OpenManage Server Assistant, the system setup program, technical specifications, console redirection, and a glossary.
The guide describes console redirection for managing a host system from a client over a serial connection, including hardware and software requirements and terminal settings. Its technical specifications list processor, memory, expansion, storage, connector, power, physical, and operating-environment details. This manual is written in French.
| Processor options | Intel Celeron at 2.53 GHz minimum or Intel Pentium 4 at 2.8 GHz minimum |
|---|---|
| Front-side bus speed | Intel Celeron 533 MHz minimum; Intel Pentium 4 800 MHz minimum |
| Internal cache | Intel Celeron 256 KB; Intel Pentium 4 1 MB minimum |
| Expansion bus types | PCI-X, PCI Express, PCI |
| PCI-X slots | Two 64-bit full-height, full-length cards at 3.3 V, 100 MHz |
| PCI Express slots | Two x1 at 3.3 V |
| PCI slots | One 32-bit, 5 V, 33 MHz card |
| Memory architecture | 72-bit ECC unbuffered DDR2 SDRAM DIMMs at 533 MHz, one or two channels |
| Memory module sockets | Four 240-pin sockets |
| Compatible memory modules | 256 MB, 512 MB, or 1 GB; minimum RAM 256 MB |
| Maximum RAM | 4 GB |
| SATA drives | Up to four 1-inch drives with integrated controller; four additional with optional SATA RAID controller |
| SCSI drives | Up to four 1-inch internal SCSI hard drives with optional SCSI or RAID SCSI controller |
| Floppy drive | Optional 3.5-inch, 1.44 MB drive |
| Optical drive | CD, DVD, or CD-RW/DVD drive in a device bay |
| Tape backup unit | Optional IDE or SCSI drive in a device bay |
| Rear connectors | RJ-45 NIC, PS/2 keyboard and mouse, parallel, serial, USB, and VGA |
| Front USB connectors | Two 4-pin USB 2.0 compatible connectors |
| Video | Intel MCH SVGA connector with 8 MB video memory |
| Power supply | 420 W, 100-240 VAC, 50/60 Hz |
| Thermal dissipation | 2275 BTU/hour maximum |
| Power supply cutoff tolerance | 20 ms minimum |
| Maximum inrush current | Up to 55 A for 10 ms or 25 A for 150 ms |
| System battery | CR2032 3.0 V lithium-ion button cell |
| Dimensions | 43.9 cm high x 19.8 cm wide x 50.0 cm deep |
| Weight | 19.1 kg (42 lb) |
| Operating temperature | 10 to 35 C operating; -40 to 65 C storage |
| Relative humidity | 20 to 80% operating; 5 to 95% storage |
| Maximum vibration tolerance | 0.25 G operating; 0.5 G storage |
| Maximum shock | 36 G operating; 71 G storage |
| Altitude | -16 to 3048 m operating; -16 to 10668 m storage |
It supports an Intel Celeron processor at 2.53 GHz minimum or an Intel Pentium 4 processor at 2.8 GHz minimum.
The system supports up to 4 GB of RAM.
A serial port on both host and client systems, a null modem serial cable, and terminal emulation software.
A 420 W AC power supply rated for 100-240 VAC at 50/60 Hz.