Dellt Online Rack External Battery Module for use with 3750W and 4200W UPS models
This getting started guide covers the installation and startup of the Dell Online Rack External Battery Module (EBM), the external battery cabinet for use with 3750W and 4200W UPS models. The document lists the module part numbers K804N, H952N, J730N, K805N and J739N and is published by Dell Inc. (July 2009).
The guide walks through unpacking, lifting the 53 kg (116.8 lb) cabinet with at least two people, installing the rails in square-hole or round-hole racks, sliding the cabinet into the rack directly below the UPS, securing it with thumbscrews, attaching the front cover, and connecting the EBM cable to the UPS battery connector. It also points to related documents such as the Dell UPS User's Guide and the Safety, Environmental, and Regulatory Information document on support.dell.com. The guide is multilingual, covering English, French, German, Russian, Spanish, Chinese, Japanese and Korean.
| Cabinet weight | 53 kg / 116.8 lb |
|---|---|
| Minimum lift personnel | 2 people |
| Rack space required | 3U |
| Compatible UPS models | 3750W and 4200W UPS models |
| Part numbers | K804N, H952N, J730N, K805N, J739N |
Yes, a small amount of arcing may occur when connecting an EBM to the UPS; this is normal and will not harm personnel. The cable should be inserted quickly and firmly.
The EBM should be installed directly below the UPS, with the rails at the bottom of the 3U space allocated for the EBM.
The cabinet weighs 53 kg (116.8 lb), so lifting it into the rack requires a minimum of two people.
No, secure the front of the cabinet to the rack using the thumbscrews on the mounting brackets and tighten by hand; do not use power tools.