Enabling Web-Managed Mode for DellTM PowerConnectTM 2708, 2716, and 2724
This document explains how to enable Web-managed mode on the Dell PowerConnect 2708, 2716 and 2724 switches, which are shipped as unmanaged switches. After powering up the switch, pressing the recessed Managed Mode button on the front panel once switches the unit to Web-managed mode and illuminates the Managed Mode LED green. The document notes that switching between unmanaged and Web-managed modes resets the switch to factory default settings.
In Web-managed mode the switch is configured with a default IP address of 192.168.2.1 and a default user login (User Name: admin, no password), and can be configured through a Web interface. The document also describes updating the switch IP address manually or by enabling DHCP addressing, recommends changing the password for security reasons, and includes a table of the default configuration for unmanaged and managed modes. The text is provided in English, Chinese, French and German.
| Default IP address (Web-managed mode) | 192.168.2.1 |
|---|---|
| Default user login | User Name: admin, no password |
| Managed Mode LED (managed mode) | Green |
| Managed mode IP settings | Default IP, net mask, no gateway, DHCP disabled |
After powering up the switch, press the Managed Mode button on the front panel once; the switch changes to Web-managed mode and the Managed Mode LED illuminates green.
The default IP address is 192.168.2.1 and the default user name is admin with no password.
The switch is reset to the factory default settings.
You can update the IP address either manually or by enabling DHCP addressing.