Dell Vostro 1520 laptop repair manual, including disassembly and assembly of the computer, adding and replacing parts, specifications, diagnostics, and system setup.
This manual is for servicing the Dell Vostro 1520 laptop. It covers adding and replacing parts, system specifications, diagnostic procedures, and the system setup program.
The diagnostics section describes device status LEDs, LED error codes, and power button LED codes. The specifications section lists processor, memory, display, battery, connector, video, audio, and other hardware details. This manual is written in Chinese.
| Processor type | Intel Core 2 Duo processor |
|---|---|
| Level 1 cache | 32 KB per instruction and 32 KB data per core |
| Level 2 cache | Shared 3 MB or 6 MB |
| External bus frequency | 1067 MHz |
| Chipset | Intel GM45 or Intel PM45 |
| Data bus width | 64-bit |
| DRAM bus width | 64-bit |
| Processor address bus width | 36-bit |
| Memory module connectors | 2 DIMM slots |
| Memory module capacity | 1 GB (1 DIMM), 2 GB (1 or 2 DIMM), 3 GB (2 DIMM), 4 GB (2 DIMM) |
| Memory type | DDR2 800 MHz non-ECC only |
| Minimum memory | 1024 MB (1 GB) |
| Maximum memory | 4096 MB (4 GB) |
| ExpressCard support | 34 mm and 54 mm ExpressCard |
| USB connectors | Four 4-pin USB 2.0 compatible connectors |
| IEEE 1394 connector | One 4-pin connector |
| Network adapter | 10/100/1000 Ethernet LAN on system board |
| Video controller | Integrated Mobile Intel GMA X4500 or discrete NVIDIA GeForce 9300M GS |
| Video memory | Integrated up to 256 MB shared; discrete 256 MB dedicated |
| Audio controller | IDT 92HD71B5 |
| Speakers | One 2-watt, 4-ohm speaker |
| Display sizes | 15.4-inch WXGA, WXGA+, or WUXGA |
| Display resolution (WXGA) | 1280 x 800 |
| Display resolution (WXGA+) | 1440 x 900 |
| Display resolution (WUXGA) | 1920 x 1200 |
| Display refresh rate | 60 Hz |
| Keyboard keys | 84 (US/Canada), 85 (Europe), 88 (Japan) |
| Touchpad resolution | 240 CPI |
| Camera resolution | 640 x 480 pixels (VGA) |
| Battery types | 4-cell 35 Whr, 6-cell 56 Whr, 9-cell 85 Whr, 12-cell 84 Whr |
Press F2 to enter the system setup program; if that does not work, restart and press F2 when the keyboard LEDs first flash.
It can indicate five states: no light for S5, amber steady for a fault with power OK, amber blinking for a fault, green blinking for S1/S3/S4, and green steady for S0.
It supports DDR2 800 MHz non-ECC memory in two DIMM slots, from 1 GB to 4 GB.
A light-blink-blink pattern indicates no SODIMM is installed.