AirFit™ P10 Nasal Pillows System User Guide
The AirFit P10 is a ResMed nasal pillows mask system that channels airflow noninvasively from a PAP device to a patient. It is intended for patients over 30 kg for whom positive airway pressure has been prescribed, for single-patient reuse at home and multi-patient reuse in hospital or institutional settings.
The guide covers fitting, adjustment, removal, disassembly, reassembly, cleaning, troubleshooting, and technical specifications. It also includes warnings, compatibility notes, and reprocessing information for use between patients.
| Therapy pressure | 4 to 20 cm H2O |
|---|---|
| Dead space (large cushions) | 123 mL |
| Pressure drop at 50 L/min | 0.4 cm H2O |
| Pressure drop at 100 L/min | 1.4 cm H2O |
| A-weighted sound power level | 21 dBA |
| Sound power level uncertainty | 3 dBA |
| A-weighted sound pressure level at 1 m | 13 dBA |
| Sound pressure level uncertainty | 3 dBA |
| Operating temperature | +5°C to +40°C |
| Operating humidity | 15% to 95% non-condensing |
| Storage and transport temperature | -20°C to +60°C |
| Storage and transport humidity | up to 95% relative humidity non-condensing |
Hold the pillows with the L and R indicators facing you, guide them into your nostrils, pull the headgear over your head, and connect the mask tubing to the device tubing.
Disassemble the pillows, wash the separated mask components except the headgear in warm water with mild soap, rinse well, and air dry; wash the headgear weekly.
It is not compatible for use with ResMed AutoSet CS 2 and VPAP Adapt SV devices.
Check that the L and R indicators are inserted correctly, refit and readjust the headgear, squeeze the pillow sides to release the inner wall, clean the pillows, and consult a clinician if the size is wrong.