This manual describes the installation and use of the AWP3753 and AWP3754 water purifiers.
The Philips AWP3753 and AWP3754 are on-tap water filters. The manual explains selecting A-, B-, or C-type adaptors, attaching the device to a faucet, and setting the timer. It lists the parts and shows the two models' different controls: AWP3753 uses a PUSH button, while AWP3754 uses a lever.
Maintenance and filter replacement instructions cover daily use, replacement intervals for one to three users, and how to replace the cartridge. The document also gives precautions, guarantee and service contact information, the packing list, and product specifications such as flow rate, pressure, dimensions, and weight.
| Model number | AWP3753, AWP3754 |
|---|---|
| Filter media | Hollow fiber membrane, activated carbon fiber |
| Water flow rate | 1.6 litres/minute |
| Minimum water pressure | 0.15~0.35 MPa |
| AWP3753 dimensions | 122.5 (W) × 71.9 (D) × 111.5 (H) mm |
| AWP3754 dimensions | 133 (W) × 80 (D) × 111.5 (H) mm |
| AWP3753 weight | 200 g (222 g when filled with water) |
| AWP3754 weight | 220 g (242 g when filled with water) |
The device can only attach to faucets with a diameter between 15 mm and 24 mm.
The water temperature for the filtration mode should be between 5°C and 38°C; above 38°C can damage the filter.
The manual gives replacement periods of every 5-6 months for 1 person, every 2-3 months for 2 persons, and every 1-2 months for 3 persons.
Turn the lever to switch among the filtered stream, unfiltered shower, and unfiltered stream modes.