This is a product manual for A&D's MS-70, MX-50, MF-50 and ML-50 blood pressure monitors. The manual introduces the features and specifications of these blood pressure monitors, and provides instructions for their use.
This manual is for the A&D MS-70, MX-50, MF-50 and ML-50 analyzers. It describes safety and compliance, precautions, installation, measurement procedures, programs, checks, printer and computer connections, data memory, calibration, functions, maintenance, specifications and index.
Safety sections warn about hot parts, flammable materials, electrical hazards and proper ventilation. Operating sections cover standard and quick modes, program storage, drying programs, self-check, temperature calibration for MS-70 and MX-50, and troubleshooting.
| Ambient operating condition | 5°C to 40°C (41°F to 104°F), 85%RH or less (no condensation) |
|---|---|
| Halogen lamp replacement recommendation | Replace after more than 5000 hours of use |
| Automatic temperature regulation | Maximum temperature is regulated to 160°C after one hour |
| High drying temperature behavior | At 200°C, the halogen lamp thermostat may work after 30 minutes |
The analyzer should be operated at 5°C to 40°C (41°F to 104°F) and 85%RH or less with no condensation.
A&D recommends replacing the halogen lamp when it has been used beyond 5000 hours.
Turn off the power switch.
No, clean it with a lint free cloth moistened with warm water and a mild detergent.