The Lutron EcoSystem to 0-10 V Interface provides a control gateway from an EcoSystem link to a 0-10 V compatible lighting device, typically an LED driver. It allows for individual addressability of the 0-10 V device, but only provides one-way communication from the controls to the 0-10 V device. This interface is for single-fixture control only. For fixtures that have multiple drivers installed (such as two or three drivers being needed to reach certain output wattages), only one interface may be necessary. This interface is not intended for control of multiple fixtures.
The Lutron TVI-LMF-2A EcoSystem to 0-10V Interface provides a control gateway from an EcoSystem link to a 0-10V compatible lighting device, typically an LED driver. It allows individual addressability of the 0-10V device with one-way communication from controls to the device, and is designed for single-fixture control only.
The interface operates on 120-277 VAC, consumes up to 1.0 W when the output load is on and 0.5 W in standby, and supports up to 5 drivers with a maximum 2 A load. It includes relay output, 0-10V control sinking up to 25 mA, and a maximum 0-10V wire length of 10 ft (3 m). Installation steps cover mounting, wiring to drivers, mains wiring, and EcoSystem link connection.
| Input Voltage | 120-277 VAC, 50/60 Hz |
|---|---|
| Maximum Power Consumption (Load On) | ≤1.0 W |
| Maximum Power Consumption (Standby) | ≤0.5 W |
| Relay Output Rating | 2 A electronic load, 5 drivers maximum |
| 0-10V Control Current Rating | 25 mA max (sink only) |
| Maximum 0-10V Wire Length | 10 ft (3 m) |
| 0-10V Voltage Range | Off ≤0.5 V, Minimum 1 V, Maximum 10 V |
| Compliance | IEC 60929 Annex E2 |
| Maximum Connected Load Current | 2 A |
The maximum 0-10V wire length is 10 ft (3 m) from the interface to the driver.
The 0-10V output uses ≤0.5 V for off, 1 V for minimum light level, and 10 V for maximum light level.
The interface consumes ≤0.5 W when the output load is turned off (standby).