This guide introduces the features and use of the …Y1… series of magnetic field sensors.
This quick start guide from Turck covers the …Y1… product series of magnetic field sensors. The sensors detect metallic objects without contact or wear, with a typical application being detection of the piston position in pneumatic cylinders. They have an output in accordance with EN 60947-5-6 (NAMUR), are compatible with all standard NAMUR processing units, and are intrinsically safe for operation in the Ex area.
The guide states the intended use and obvious misuse, gives general safety instructions and notes on explosion protection, and describes installing, connection, commissioning and operation. For safety-related applications it points to the separate safety manual, and it refers to the data sheet for wiring diagrams, pin assignment and detection range. It also covers the yellow status LED, repair handling and disposal. The document is printed in Chinese, German and English. This manual is written in Chinese.
| Output | In accordance with EN 60947-5-6 (NAMUR) |
|---|---|
| Protection type | Intrinsically safe, suitable for operation in the Ex area |
| Switch-on delay | 80 ms |
| Status LED | Yellow: off = no magnetic field detected, output not switched; on = magnetic field detected, output switched |
| EMC | Meets EMC requirements for industrial areas |
It detects metallic objects without contact and without wear; a typical application is detecting the piston position in pneumatic cylinders.
Once the cables are connected and the supply voltage is switched on, the device becomes operational automatically after a switch-on delay of 80 ms.
When the yellow LED is on, a magnetic field is detected and the output is switched; when it is off, no magnetic field is detected and the output is not switched.
No, the device is not intended for repair. Defective devices should be taken out of operation and sent to Turck for fault analysis.