Turck BI5-EG18-Y1X/S100 7M inductive sensor technical data: 5 mm flush sensing range, 2-wire NAMUR output, M18x1 stainless steel body, ATEX ratings.
This four-page Chinese-language technical data sheet from Hans Turck GmbH & Co. KG describes the BI5-EG18-Y1X/S100 7M inductive sensor with extended sensing range (order number 4012007). The sensor has a 5 mm rated switching distance, flush mounting, a 2-wire NAMUR output (nom. 8.2 VDC), an M18 x 1 threaded stainless steel 1.4301 (AISI 304) housing, a 7 m PVC cable and an operating temperature range of -25…+100 °C. It carries KEMA 02 ATEX 1090X certification with the marking Ex II 1 G Ex ia IIC T6 Ga / II 1 D Ex ia IIIC T135 °C Da, plus safety ratings SIL 2 / PL c and SIL 3 / PL e.
The document lists common, electrical and mechanical data, a wiring diagram and the functional principle, installation distances and mounting accessories, and usage instructions covering intended use, installation and commissioning in hazardous areas, and maintenance. It states that the device cannot be repaired and that it may only be connected to certified intrinsically safe Exi circuits. This manual is written in Chinese.
| Order number | 4012007 |
|---|---|
| Rated switching distance | 5 mm |
| Mounting | Flush |
| Output | 2-wire, NAMUR |
| Switching frequency | 1 kHz |
| Design | Threaded, M18 x 1 |
| Housing material | Stainless steel 1.4301 (AISI 304) |
| Operating temperature | -25…+100 °C |
| Degree of protection | IP67 |
| Maximum tightening torque of housing nut | 25 Nm |
| Approval | KEMA 02 ATEX 1090X |
The rated switching distance is 5 mm, with flush mounting.
It has a 2-wire output that follows the intrinsically safe DIN EN 60947-5-6 (NAMUR) standard.
The sensor is rated IP67.