This document is about the dimensions of aluminum electrolytic capacitors
The document is a Cornell Dubilier application guide for aluminum SMT capacitors. It presents case dimensions and an outline drawing, reflow soldering temperature profiles by case code, tape and reel specifications, land patterns, and component orientation.
It also covers cleaning and coating guidance for V-Chips, including recommended cleaning agents, the reaction of free chlorine with aluminum, solvents that should not be used, and a notice and disclaimer.
| Case code A diameter and length | 3.0 mm diameter, 5.4 mm length |
|---|---|
| Case code P diameter and length | 16.0 mm diameter, 16.5 mm length |
| Reflow peak temperature and time at 200 °C for case codes A, B, C, D, X | 240 °C peak; 40 seconds maximum at 200 °C |
| Reflow peak temperature and time at 200 °C for case codes E, F, G, H | 230 °C peak; 30 seconds maximum at 200 °C |
| Reel size for case codes A and B | 380 ±2.0 mm |
| Tape width for case code A | 12.0 mm |
| V-Chip immersion time in Level 1 and 2 solvents | 5 minutes |
| Cleaning agents to avoid | Chlorine-based halogenated cleaning solvents, adhesives and coating agents |
Yes. V-Chips may be immersed safely for 5 minutes in Level 1 and 2 solvents.
Do not use chlorine-based halogenated cleaning solvents, adhesives or coating agents.
The peak temperature is 240 °C, with a maximum of 40 seconds at 200 °C.
Make sure the assembly is dried thoroughly after cleaning.