The selection conditions of the air cylinder are different from ordinary air cylinders. Please confirm the suitability with the selection guide.
This document is a selection guide for STS/STL Series guided air cylinders, providing a six-step procedure to determine the appropriate cylinder size and configuration based on operating conditions.
It covers confirmation of initial and working conditions (pressure, load weight, installation direction, stroke, operation time and speed), calculation of static load and moments (bending, radial, and twisting), and verification of load limits and cushion performance against allowable values in reference tables.
| Available bore sizes | 8, 12, 16, 20, 25, 32, 40, 50, 63, 80 mm |
|---|---|
| Working pressure range | 0.1 to 1.0 MPa |
| Allowable bending/radial moment (8mm bore) | 4.1 N·m |
| Allowable energy absorption (rubber cushion, 8mm) | 0.029 J |
| Load factor | 40%, 50%, 60% |
Follow the six-step selection procedure: confirm initial and working conditions, select approximate cylinder size based on theoretical thrust, calculate load and moments, confirm load and movement based on operation direction, and verify cushion performance.
The allowable energy absorption (E1) is unique to each cylinder and differs based on bore size and cushion type (rubber cushion, rubber air cushion, or air cushion).
The load weight includes the load, jig weight, and guide rod weight. The guide rod weight is calculated using formulas based on bore size and stroke length.