testo 511 absolute pressure meter manual, introduces the product's use method, safety instructions, specifications and parameters.
The Testo 511 is an instrument for measuring absolute pressure. It is commonly used for pressure compensation in pipeline wind speed measurement, for absolute pressure measurement in laboratories and production processes, and for measuring atmospheric pressure and altitude.
This manual includes safety instructions, specifications and technical data, a product description, and initial steps for installing batteries and basic settings. It also describes instrument operation, battery replacement and cleaning, and help for messages such as Hi or Lo. This manual is written in Chinese.
| Sensor | Absolute pressure sensor |
|---|---|
| Units | Pa, hPa, mbar, mmH2O, mmHg, inHG, inH2O, psi |
| Measuring range | 300 to 1,200 hPa, 120.4 to 481.8 inH2O |
| Resolution | 0.1 hPa, 0.01 inH2O |
| Protection rating | IP 40 |
| Operating temperature | 0 to +50C, +32 to +122F |
| Storage and transport temperature | -40 to +70C, -40 to +158F |
| Power supply | 2 x 1.5V AAA batteries |
| Battery life | 200 hours with backlight off |
| Dimensions | 119 x 46 x 25 mm / 4.7 x 1.8 x 1.0 in |
| Weight | 90 g / 3.2 oz including battery and protective cap |
| Accuracy | +/-3.0 hPa, +/-1.2 inH2O |
| Measurement rate | 0.5 seconds |
The units are Pa, hPa, mbar, mmH2O, mmHg, inHG, inH2O, and psi.
It uses 2 x 1.5V AAA batteries. Battery life is 200 hours with the backlight off.
The altitude of the measurement point must be determined and set in the instrument. The altitude must be reset if it changes.
Hi or Lo means the reading is outside the measuring range. Measure within the specified range.