This document is about the use instructions of Omega couplings, including coupling types, specifications, installation and maintenance.
The Rexnord Omega Elastomer Couplings Type E and ES, sizes 2-140, are designed to provide a mechanical connection between rotating shafts using a torsionally soft flexible element that accommodates misalignment while transmitting power and torque. The document gives installation and maintenance instructions and states that it is the original English-language document.
It covers safety hints, drive alignment, hub mounting, cap screw torque, Type E and ES mounting options, preventative maintenance and element replacement. Tables list part numbers, alignment values, cap screw torques, Type E mounting dimensions and Type ES shaft-gap options.
| Coupling sizes | 2 to 140 |
|---|---|
| Shaft engagement length | Greater than 0.8 times shaft diameter; bushed hubs must engage 100% |
| Cap screw torque, size 20 | 468 in-lbs / 53 Nm |
| Cap screw torque, size 60 | 816 in-lbs / 92 Nm |
| Cap screw torque, size 140 | 7080 in-lbs / 800 Nm |
Look for fatigue cracks at element splits, discoloration, and surface cracking in the body of the element.
First seat all cap screws with a light torque, then tighten all cap screws to the proper torque using a torque wrench.
No. The instructions say not to lubricate cap screw threads and to apply a thread-locking adhesive.
Always replace both half elements, and install both half elements from the same box.