4B WDB2 series bearing temperature sensor installation and operating instructions
This Chinese-language installation and operating instruction document covers the 4B WDB2 Series bearing temperature sensor. It opens with the customer safety notices that must be read before installing or using any 4B product, and explains how to reach 4B through go4b.cn or the 24-hour service hotline, register a product and request service. Safety warnings about exposed moving parts and bucket elevators are included.
The sensor information sheet lists the selectable sensor types (WDB20V3CAI NTC with user-adjustable alarm temperature, WDB21V3CAI through WDB26V3CAI PTC types with alarm temperatures from 50 °C to 100 °C, and WDB29V3CAI Pt100), together with the cable colours used to identify them. The document also gives PTC electrical parameters, CSA data and ATEX/IECEx/3C certification information, correct versus incorrect mounting relative to a drain line, and the exclusive written limited warranty. This manual is written in Chinese.
| Mounting thread | 1/8" NPTF |
|---|---|
| Maximum operating pressure (CSA) | 2 bar (29 psi) |
| Ambient temperature (CSA) | -40 °C to +40 °C |
| Electrical parameters (CSA) | 12 V dc, 20 mA |
| Maximum cable temperature | 80 °C |
| Maximum temperature in dust atmosphere | T125 °C (sensor body) |
The CSA certification information gives a maximum operating pressure of 2 bar (29 psi).
The sensor cables are colour-coded; the table lists each model with its type, alarm temperature and cable colour, for example blue for the NTC type and red for the PTC types.
It should be mounted higher than the lowest point of the pipe; mounting it below the lowest point of the drain hose is shown as incorrect because water can flow back to the sensor.
4B gives an exclusive written limited warranty for one year from the date of purchase for defects caused by faulty workmanship or materials.