The IM436 is a three-channel DC differential signal conditioner that provides the following functions: A. Measurement in the range of 250mA current and 1000V voltage. B. Provides 0-5V, 0-10V and 0-100V DC output signals. C. Provides 100Hz, 1kHz and 10kHz AC output signals. D. Provides multiple signal selection functions, including single-channel, dual-channel and three-channel. E. Provides automatic zero-point calibration and automatic range calibration. F. Provides a digital display screen to display input signals and output signals.
The ENDEVCO Model 436 is a three-channel DC differential voltage amplifier designed for use with piezoresistive accelerometers, pressure transducers, and strain gauges. It provides AC output proportional to input, with up to 1,000x amplification and a default 10 kHz Butterworth lowpass filter. The unit supports excitation voltages of 0, 5, 10, or 15 VDC and can be remotely programmed via the OASIS 2000 software. It is intended for use with the ENDEVCO Model 4990 rack system and includes detailed installation, operation, and troubleshooting instructions.
| Input Range | 0 to ±10 VDC or peak AC |
|---|---|
| Gain Range | Programmable from 0 to 1000 |
| Output DC Bias Stability with Temp | ±5 uV/°C RTI for G > 100 (typical) |
| Lowpass Filter Corner Frequency | 10 kHz ± 12% (default) |
| Power Requirement | +5VDC, ±15 VDC, +24 VDC |
| Dimensions | 144.45mm x 280 mm |
The default corner frequency is 10 kHz ± 12%.
It supports excitation voltages of 0, 5, 10, or 15 VDC.
It requires the ENDEVCO OASIS 2000 Model 1xx/4xx Configuration Editor Software.
The minimum current output is 10 mA (10V into a 1 kΩ load).