Elma TR1000 motor fault tester is used for fast and reliable motor fault testing, through comparison measurement of motor resistance and inductance, no reference values are required to quickly detect motor faults.
The Elma TR1000 is a compact motor tester designed for safe and fast fault detection of electric motors, stators, and rotors. It uses a comparison measurement principle without needing reference values. The device applies strong pulses to the test object, with pulse width around 10μs, frequency around 500Hz, and maximum current around 0.5A. Measurements are taken via voltage drop across series resistors, indicating resistance and self-inductance. It features two measurement ranges: one for inductive measurements and one for insulation testing. The device can test motors from 5-7.5kW and above, with adjustable low and high inductance settings. It also supports remote testing up to hundreds of meters away and includes safety instructions for high-voltage operations.
The manual includes step-by-step instructions for testing star- and delta-connected motors, two-speed motors, motors with phase compensation, and motors with inaccessible shafts. It also covers insulation testing using a red button and provides technical specifications such as 10W-1000kW motor range, 9V for inductive measurement, 500V DC for insulation, and 100mA fuse protection. Safety warnings are emphasized, including disconnecting power before testing and using insulated gloves and protective gear.
| Motor Range | 10W-1000kW |
|---|---|
| Inductive Measurement | Max: 9V |
| Insulation Measurement | 500V DC |
| Fuse Protection | 100 mA |
| Dimensions | 95x158x50 mm (without case) |
| Weight | 450 gr (including battery, without case) |
| Battery | 1x9V, 6LR61 alkaline battery |
The Elma TR1000 can test motors from 10W to 1000kW.
It uses a comparison measurement principle by applying strong pulses to the test object and measuring voltage drop across series resistors.
Yes, it can test motors remotely up to hundreds of meters away using test leads connected to the motor’s terminal box, starter, or contactor.