Elma CM-07 is a digital current clamp with DC/AC current measurement, frequency measurement, insulation resistance measurement, relative zero position function, the maximum display value is 10A, the minimum resolution is 10mA, the display screen is 3 3/4 digit LCD, and it has a fast bar graph display (20 times/sec). It supports Max/Min and Data Hold functions. It is suitable for use in distribution boxes, transformers, etc. It is safe to use.
This manual provides instructions for the Elma CM-07 digital clamp meter, a device designed for accurate DC/AC current measurement. It features a large 3 3/4 digit LCD display, a fast bargraph display, and functions for frequency measurement, data hold, and max/min recording. The device is suitable for use in crowded switch boxes and cable areas.
| Resolution (DC) | 10 mA |
|---|---|
| Resolution (AC) | 1 mA |
| Display | 3 3/4 digits LCD |
| Jaw Diameter | 23 mm |
| Bargraph Speed | 20 times/sec |
| Power Consumption | 10 mA |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Dimensions | 183mm x 61.3mm x 35.6mm |
| Weight | 190g |
The resolution is 10 mA for DC and 1 mA for AC.
Press the Data Hold button to freeze the reading on the LCD; press again to release it.
It indicates the battery voltage has dropped below the minimum required level, and batteries should be replaced.
Yes, it supports non-contact frequency measurements for AC signals of at least 0.1 Ampere.