This is a Celestron Nightscape 8300 CCD imaging camera with AstroFX control software.
This document serves as a setup guide for the Celestron Nightscape 8300 CCD imaging camera. It details the unboxing of included items, the installation of the AstroFX control software, and the necessary driver setup for Windows XP, Vista, or 7 systems. The guide also explains how to power the device using the included cables.
| Sensor | Kodak KAF-8300 |
|---|---|
| Active Pixels | 8.3MP |
| Sensor Size | 17.96 mm (H) x 13.52mm (V) |
| Pixel Size | 5.4μm x 5.4μm |
| Exposure Range | 0.001 sec to 24 hours |
| Shutter | Internal mechanical central shutter |
| Operating Temperature | 40°C to -40°C |
| A/D Conversion | 16 bit |
| Full Well Capacity | 25,500e- |
| Read Noise | 8e- |
| Dark Current | 0.15e-/pixel/second at 0°C |
| Quantum Efficiency | 33%@480nm, 40%@540nm, 33%@600nm |
| Dynamic Range | 64.4dB |
| USB Cable | High-speed 2.0 |
| Power Input | 12VDC 1.5A |
| Weight | 2 lbs (0.91 kg) |
| Warranty | 2 years |
The system requires a Pentium or equivalent processor, Windows XP/Vista/7, 1 GB RAM, 500 MB disk space, and a display of 1024x768.
The camera can be cooled up to approximately 20°C below the ambient temperature.