This document is about the user manual of CaMate series products, mainly introducing the configuration and control methods of CaMate series products, including Windows application software, Baudrate, LED control mode, Fade in/out, Trigger Level, LED indicator, Ambient Light, LED Light Level, DO Mode, Angle Level, Diagnostic Page, Firmware Upgrade, FactoryCode Page and other contents.
The Vivotek CaMate illuminators feature variable beam angles that can be adjusted via an RS485 connection. Users can remotely control LED ON/OFF, trigger levels, dimming, and fade effects using a PC or Android mobile device connected through a USB-to-RS485 converter.
Configuration and control are managed through dedicated Windows application software and an Android APP. The manual details the setup of the RS485 interface, the use of the Master Device ID for configuring multiple units, and the specific command sets available for firmware upgrades and status queries.
| Device ID Range | 0 to 127 |
|---|---|
| Default Baudrate | 38,400 |
| Termination Resistor | 120Ω or greater |
| Connection Interface | RS485 |
The default Device ID is 1, unless a change was previously made.
Connect the illuminator to a PC via an RS485 interface using a separately purchased USB-to-RS485 converter.
Yes, by using the special Master Device ID 80h (128) to configure any device regardless of its individual ID.