This document is a short instruction manual for the Rotronic RMS-TCD-S digital temperature probe, which introduces the connection, installation, adjustment and calibration steps.
The document provides brief instructions for connecting the Rotronic RMS-TCD-S digital temperature probe to a transmitter or cable. It emphasizes aligning catches correctly and tightening the knurled nut by hand to ensure the IP protection rating is maintained.
For mounting, the manual states that the probe should be completely immersed in the environment being measured. It also notes that probes are adjusted at the factory but recommends recalibration after one year of use.
| Measurement range | -190...200°C |
|---|---|
| Accuracy | ±0,25 °C bei -50…85 °C |
| Long term stability | ±0.5 °C/year |
| T63 | 90 s |
| Housing material | Polycarbonate |
| Housing diameter | Ø15 mm |
| Housing length | 110 mm |
| IP Rating (Housing) | IP65 |
| Sensor material | Stainless steel - austenitic - 1.4571 (316Ti) |
| Sensor diameter | Ø3 mm |
| Sensor length | 50 mm |
| IP Rating (Sensor) | IP68 |
We recommend a calibration after 1 year of use.
Plug it onto the mating connector and tighten the knurled nut by hand.