2.4G Bluetooth Datalink is a long-range wireless transmission device developed by DJI Innovations for ground station applications. It consists of Air end and Ground end, and can be connected to the flight control system using USB or CAN-Bus. It can then communicate with other devices wirelessly via Bluetooth.
This manual provides instructions for the DJI 2.4G Bluetooth Datalink, which consists of an Air end and a Ground end for reliable remote wireless transmission. It details the system components, including the BTU module, USB cable, and CAN-Bus cable, and explains how to connect the device to flight control systems like ACE ONE, WKM, and NAZA-M.
| RF Data Rate | 1536kbps |
|---|---|
| Indoor/Urban Range | ≤350m |
| Outdoor/RF Line-of-Sight Range | ≤2km |
| Transmit Power | ≤125mW |
| Receiver Sensitivity | -94dBm |
| Frequency Band | 2.4G(2400MHz ~2483MHz) |
| Serial Data Rate | 115200 bps |
| Operating Temperature | -10°C ~+55°C |
| Ground end Weight (with Antenna) | 93g |
| Air end Weight (with Antenna) | 32g |
The supported flight control systems are ACE ONE (Firmware V4.02 or above), WKM (Firmware V5.24 or above), NAZA-M, and NAZA-M V2 (Firmware V4.00 or above).
The distance between the two ends should be more than 1.5m.
The LINK TX/RX LED on the Air end will be solid green.
The Ground end requires a supply voltage of 9.9V to 25.2V DC.