This manual introduces the features and characteristics of the Blue Sky Energy Solar Boost 2512i-HV / SB2512iX-HV MPPT solar charge controller, including maximum power point tracking, 20/25 amps 12VDC, installation and operation instructions.
This manual covers the installation and operation of the Blue Sky Energy Solar Boost 2512i-HV and 2512iX-HV, which are 25 amp Maximum Power Point Tracking (MPPT) photovoltaic charge controllers. The SB2512iX-HV is the full-featured version, while the SB2512i-HV omits certain features such as battery temperature sensing and auxiliary output to reduce cost. Both models utilize patented MPPT technology to increase charge current and allow the use of higher voltage 60-cell modules.
| Maximum Charge Current | 25A |
|---|---|
| Battery Voltage | 12VDC |
| Maximum Battery Capacity | 2,000 amp-hours |
| Charge Voltage Setpoint Range | 13.2V to 15.0V |
| Charge Status Indicator Modes | OFF, BULK, ABSORPTION, FLOAT, EQUALIZE |
The SB2512iX-HV includes a battery temperature sensor input, equalization capability, full IPN Network interface, and an auxiliary output, while the SB2512i-HV omits these features.
The unit must not be connected to a PV array capable of producing greater than 20 amperes of short circuit current at STC.
Battery, PV and Auxiliary Output terminals must be tightened to 9 in-lb (1 Nm).