This document is the installation and operation manual for Blue Sky Energy's SC30 / SC30-LVD (SUN CHARGER 30 PWM) 12VDC 30AMP pulse width modulated photovoltaic charge controller.
This manual covers the Blue Sky Energy Sun Charger 30 (Models SC30 and SC30-LVD), a 30 amp 12 volt Pulse Width Modulated (PWM) photovoltaic battery charge controller. The unit features a 3-stage plus equalization charge control system and is electronically protected against voltage transients, over temperature, over current, short circuit, and polarity swaps. The SC30-LVD version includes an optional load and lighting control drive signal.
| Charge Controller Type | Pulse Width Modulated (PWM) |
|---|---|
| Rated Current | 30 amp |
| System Voltage | 12 volt |
| Battery Chemistry | 12 volt flooded or sealed type lead-acid |
| Battery Capacity Range | 20 to 2,000 amp-hours |
| Maximum PV Short Circuit Current | 27 amps |
| Maximum PV Open Circuit Voltage | 24 volts |
| Over Current Protection | 40 amperes maximum |
| Terminal Torque (Battery/PV) | 4.4 in-lb (0.5 nm) |
| Terminal Torque (Temp Sensor) | 2.1 in-lb (0.24 nm) |
The unit is designed to charge 12 volt flooded or sealed type lead-acid chemistry batteries.
The PV array must not be capable of producing greater than 27 amps of short circuit current.
Press the Display Select button for 5 seconds while viewing amp-hours on the display.
The circuit must be provided with 40 amperes maximum branch-circuit over current protection.