Analog Devices ADSP-2101 EZ-ICE RS-232 Addendum to the 2100 Family EZ-Tools Manual

About this manual

This document serves as an addendum to the 2100 Family EZ-Tools Manual, specifically addressing incorrect information regarding RS-232 connections in Section 2.2.1.2 of the original manual (document number 31-000008-01). It clarifies the proper pinout for the RS-232 interface on the 21xx EZ_ICE board, specifying that TX connects to pin 2, RX to pin 3, and ground to pin 5.

What's inside

• RS-232 Interface Pinout
• DCE vs DTE Device Types
• Null Modem Cable Usage
• EZ-ICE Board Connection

Frequently asked questions

What is the correct RS-232 pinout for the EZ_ICE board?

TX connects to pin 2, RX connects to pin 3, and ground connects to pin 5.

When can a standard RS-232 DB-9 Serial Cable be used?

A standard cable works if the EZ-ICE board is set up as a DCE device and the PC is a DTE device.

When must a null modem cable be used?

A null modem cable is required when connecting the EZ-ICE board to another DCE device.