This document is the Philips OccuPlus Commissioning Guide - IRT8097, which describes the calibration of the OccuPlus sensor, DALI function assignment, light switch control, movement testing, and commissioning of switches with Enocean® RF technology.
This guide explains how to commission the Philips IRT8097 OccuPlus sensor, including calibration, test mode, and binding of switches. It details the required button presses, LED indications, and safety notes for successful installation.
The document walks through the commissioning sequence: short press of the front button, holding until LEDs flash rapidly, selecting the desired switch, and confirming the binding. It also covers aborting the process, resetting counters, and performing night‑time calibration.
| Burn time without dimming | 100 hours |
|---|---|
| MD timer | 30 sec (fixed) |
| LED status (normal operation) | constant green |
Press the front button of the OccuPlus shortly, then hold it down until the green and red LEDs start flashing rapidly.
Press the DALI button to abort the commissioning process.
Press one of the keys of the switch you want to bind after the LEDs flash rapidly.