ARM8020 is an industrial-grade embedded motherboard designed by Beijing Art Technology Development Co., Ltd. It features high cost performance, compact size, and low power consumption. The motherboard uses Intel's XScal series PXA270 processor, runs embedded Linux or WinCE operating system, and has abundant interface resources, making it suitable for various industrial control computing tasks.
The ARM8020 is an industrial‑grade embedded motherboard designed by Beijing Art Technology. It features an Intel XScale PXA270 CPU, low power consumption and a wide range of interfaces for control applications.
This user manual covers safety precautions, mechanical dimensions, electrical parameters, connector pin‑outs, software driver support and ordering information, helping users install, configure and maintain the board safely and efficiently. This manual is written in Chinese.
| CPU | Intel XScale PXA270 |
|---|---|
| CPU Frequency | 520 MHz |
| Power Consumption | 5 W |
| SDRAM | 128 MB PC133 |
| NOR Flash | 32 MB |
| NAND Flash | 256 MB |
| CF Card Capacity | 256 MB‑8 GB |
| VGA Resolution | 800 × 600 |
| USB Host Ports | 2 ports USB 2.0 |
| USB Device Port | 1 port USB 2.0 |
| CAN Bus Ports | 2 ports CAN 2.0 A/B |
| Operating Temperature | -40 °C to +85 °C |
| PCB Layers | 6‑layer |
| RTC Backup Battery Type | CR1220 |
Before moving the board, cut the power, ensure all signal and power connections are made, keep unused screws and parts away, and avoid dust, moisture and extreme temperature changes.
The board is rated for industrial use from –40 °C up to +85 °C.
It uses an Intel XScale PXA270 processor with a maximum frequency of 520 MHz.
The board has two USB Host ports and one USB Device port, all supporting USB 2.0.