This is a product manual that introduces the features and usage of PLANET ICA-M220 / ICA-M220W camera
This manual explains how to install, configure, and operate the Planet ICA-M220 and ICA-M220W Mega‑Pixel CMOS PT Internet Camera. It covers hardware installation, network setup, wireless configuration, and advanced features such as motion detection and pan/tilt control.
Key sections include basic setup, system requirements, hardware installation, IP address discovery, web‑based management interface, network and wireless settings, motion detection configuration, and detailed specifications in the appendix.
| Image Sensor | 1.3 Mega‑Pixel 1/4" color CMOS sensor |
|---|---|
| Lens | 4.8 mm, F1.8 |
| Sensitivity | 41 Lux |
| Signal‑to‑Noise Ratio | > 50 dB |
| Video Encoder | MPEG‑4 and M‑JPEG dual codec |
| Video Resolution (30 fps) | 640×480, 320×240, 160×120 |
| Pan Range | 350 degrees |
| Tilt Range | 120 degrees |
| Audio Codec | G.726 |
| Network Interface | 1 × RJ‑45 |
| Wireless Standards | IEEE 802.11b/g/n |
| Power Requirement | 12 V DC, 1 A |
| Dimensions (W×D×H) | 108 mm × 112 mm × 108 mm |
| Weight | 350 g (camera) / 300 g (accessories) |
| Operating Temperature | 0 °C – 50 °C |
Use the utility described in section 2.3.2 “Locate the IP Address of this IP Camera”.
The ICA-M220W supports IEEE 802.11b, 802.11g, and 802.11n.
The camera requires a 12 V DC power supply delivering 1 A.
Up to 16 users can be created, each with a separate password.