Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeSanyo Machine Works SDNR Error 68: TIGHTENING ANGLE MAXIMUM TROUBLE

  TIGHTENING ANGLE MAXIMUM TROUBLE means the angle of tightening has surpassed the set maximum limit. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 67: TIGHTENING TIME MAXIMUM TROUBLE

  TIGHTENING TIME MAXIMUM TROUBLE indicates the tightening process has exceeded its maximum allowed time. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 66: TORQUE MAXIMUM TROUBLE

  TORQUE MAXIMUM TROUBLE indicates that torque has exceeded the maximum allowable limit. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 65: SNUG TIME MAXIMUM TROUBLE

  SNUG TIME MAXIMUM TROUBLE means the time for snug fitting is longer than the maximum allowed value. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 64: SNUG ANGLE MAXIMUM TROUBLE

  SNUG ANGLE MAXIMUM TROUBLE indicates that the snug angle exceeds the maximum acceptable level. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 63: SNUG TIME MAXIMUM TROUBLE

  SNUG TIME MAXIMUM TROUBLE signifies that snug fitting time is longer than the maximum allowed value. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 62: SEATING ANGLE MAXIMUM TROUBLE

  SEATING ANGLE MAXIMUM TROUBLE means the seating angle exceeds the maximum acceptable threshold. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 61: SEATING TIME MAXIMUM TROUBLE

  SEATING TIME MAXIMUM TROUBLE indicates that seating time exceeds the maximum allowable limit. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 56: RUN DOWN TORQUE MINIMUM TROUBLE

  RUN DOWN TORQUE MINIMUM TROUBLE means the torque during run-down is below the minimum required value. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 55: RUN DOWN ANGLE MINIMUM TROUBLE

  RUN DOWN ANGLE MINIMUM TROUBLE indicates that the run-down angle is below the minimum acceptable level. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 54: MID. POINT TORQUE MINIMUM TROUBLE

  MID. POINT TORQUE MINIMUM TROUBLE means the torque at the mid-point judgment is below the minimum acceptable value. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 53: TORQUE TENSION ANGLE ERROR

  TORQUE TENSION ANGLE ERROR occurs when the angle from the theoretical seating point exceeds the control angle. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 52: TORQUE TENSION CALCULATION ERROR

  TORQUE TENSION CALCULATION ERROR means there is an error in calculating the theoretical seating point torque. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 51: SLOPE CALCULATION ERROR (Over flow)

  SLOPE CALCULATION ERROR (Over flow) happens when SLOPE calculation exceeds the maximum value allowed. The manual lists no action for this code.

• CodeSanyo Machine Works SDNR Error 50: SLOPE CALCULATION ERROR (0)

  SLOPE CALCULATION ERROR (0) occurs when dividing by zero during SLOPE calculation. The manual lists no action for this code.