Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
AL-11 indicates a position error when the value exceeds preset pulse limits. The manual's first action is: “an Alarm message AL-11(Position error value alarm) will be displayed.”
Input terminals CCWL and CWL are activated simultaneously. The manual's first action is: “Set the parameter Cn002.1=1 to disable the drive limit function temporarily during trial run period.”
All 18 error codes of the TED TSTE Series TED TSTE Series with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
The received data exceeds the range that the balance can accept. The manual's first action is: “Confirm the parameter range of the command.”
The system detected incorrect data in a command. The manual's first action is: “Confirm the command.”
The balance received excessive characters in a command. The manual's first action is: “Confirm the command.”
The system timed out waiting for a response from the balance. The manual's first action is: “Confirm the communication.”
The value entered is beyond the settable range. The manual's first action is: “Re-enter the value.”
The balance has detected an overload condition. The manual's first action is: “Remove the sample from the pan.”
The calibration weight is too light. The manual's first action is: “Confirm the calibration weight value.”
The calibration weight is too heavy. The manual's first action is: “Confirm the calibration weight value.”
The value entered is beyond the settable range. The manual's first action is: “Re-enter the value.”
The balance cannot stabilize due to an environmental problem. The manual's first action is: “Prevent vibration, drafts, temperature changes, static electricity and magnetic fields.”
All 10 error codes of the A&D GF series balance with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
The Ambient Temperature Sensor has detected an abnormal temperature condition. The manual's first action is: “Ambient Temperature Sensor”