Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeLinos 4401-345-000-21 Error E03: shorted connection to position sensing lens1

  E03 indicates a shorted connection to position sensing lens1 The manual lists no action for this code.

• CodeLinos 4401-345-000-21 Error E02: open connection to position sensing lens2

  The system cannot establish a connection to position sensing lens2. The manual lists no action for this code.

• CodeLinos 4401-345-000-21 Error E01: open connection to position sensing lens1

  The system cannot establish a connection to position sensing lens1. The manual lists no action for this code.

• CodeLinos 4401-345-000-21 Error E00: invalid command

  The system has received an invalid command. The manual lists no action for this code.

• Code listLinos 4401-345-000-21 Error Codes

  All 11 error codes of the Linos 4401-345-000-21 Linos 4401-345-000-21 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeLenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Error 0271: Check Date and Time settings.

  The system cannot create or modify data due to insufficient storage space in the UEFI variable storage. The manual's first action is: “The date or the time is not set in the computer. Enter the UEFI BIOS menu and set …

• CodeLenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Error 0199: System Security - Security password retry count exceeded.

  System Security - Security password retry count exceeded. The manual's first action is: “This message is displayed when you enter a wrong supervisor password more than three times. Confirm the supervisor password and …

• CodeLenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Error 0191: System Security - Invalid remote change requested

  System Security - Invalid remote change requested The manual's first action is: “The system configuration change has failed. Confirm the operation and try again.”

• CodeLenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Error 0190: Critical low-battery error

  The computer turned off because the battery power is low. The manual's first action is: “The computer turned off because the battery power is low. Connect the ac power adapter to the computer and charge the batteries.”

• Code listLenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Error Codes

  All 4 error codes of the Lenovo T14 Gen 2, T15 Gen 2, P14s Gen 2, P15s Gen 2 Lenovo laptop with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeIntex ECO5110 & 6110 Error "BLANK": No Power or "Power Saving Mode" waiting to start next Saltwater System cycle.

  No Power or "Power Saving Mode" waiting to start next Saltwater System cycle. The manual lists no action for this code.

• CodeIntex ECO5110 & 6110 Error 93: Stand-By Mode (Operating Process finished)

  The system has completed its operating cycle and entered Stand-By mode. The manual's first action is: “Household voltage is too high or too low (± 20%). Check the voltage is within the range stated on the device housi…

• CodeIntex ECO5110 & 6110 Error 92: Alarm Code (High Salt Level)

  The system has detected a high salt level. The manual's first action is: “Partially drain the pool and refill it with fresh water. See "Salt & Pool Water Volumes".”

• CodeIntex ECO5110 & 6110 Error 91: Alarm Code (Low Salt Level)

  Alarm Code (Low Salt Level) indicates insufficient salt in the pool. The manual's first action is: “Remove the electrolytic cell for inspection. Clean it if necessary. See "Maintenance".”

• CodeIntex ECO5110 & 6110 Error 90: Alarm Code(Low Pump Flow/No Pump Flow)

  Alarm Code 90 indicates low pump flow or no pump flow. The manual's first action is: “Ensure filter pump is attached and operating. See "Setup Instruction".”