Door motor mechanism failure has occurred as the controller does not detect motor rotation. The manual's first action is: “- Press STOP key. - Turn power off for 30 seconds then turn power on. If the door motor never stops rotating, or if the F95 error comes back again, verify wiring of the motor. If wiring is good, replace the EOC. - If the problem persists, replace the motor door latch assembly.”
- Model
- Frigidaire Gallery Series Professional Series
- Display shows
- F90
- Type
- Fault code
- Source
- Manual p. 6
What F90 means
Door motor mechanism failure. The controller does not see the motor rotating. p. 6
Common causes
- Door motor mechanism failure. The controller does not see the motor rotating. p. 6
What to do
- - Press STOP key. - Turn power off for 30 seconds then turn power on. If the door motor never stops rotating, or if the F95 error comes back again, verify wiring of the motor. If wiring is good, replace the EOC. - If the problem persists, replace the motor door latch assembly. p. 6
If F90 is still not resolved
The manual gives no further instruction for this code. Open the code table in the PDF or contact Frigidaire service.
This page summarises what the manufacturer’s manual says about F90; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with Frigidaire. Found a mistake? Report an error.