ABB ACS550-01 / ACS550-U1 Error 2013: AUTORESET

ACS550-01/U1 drive · taken from the manufacturer’s manual, pages cited

Alarm code2013

This alarm warns that the drive is about to perform an automatic fault reset, which may start the motor. The manual's first action is: “To control automatic reset, use Group 31: AUTOMATIC RESET.”

Model
ABB ACS550-01 / ACS550-U1
Display shows
AUTORESET (2013)
Type
Alarm code
Source
Manual p. 268

What 2013 means

AUTORESET p. 268

Common causes

  • This alarm warns that the drive is about to perform an automatic fault reset, which may start the motor. p. 268

What to do

  1. To control automatic reset, use Group 31: AUTOMATIC RESET. p. 268

Before you service the product, read the safety instructions in the manual p. 6.

If 2013 is still not resolved

  • contact your local ABB representative for replacement p. 6
    “Never attempt to repair a malfunctioning drive; contact your local ABB representative for replacement.”
  • For more technical information, contact your local ABB representative. p. 7
    “For more technical information, contact your local ABB representative.”
Open the manual at page 268 All ACS550-01 / ACS550-U1 error codes Manual details & download

This page summarises what the manufacturer’s manual says about 2013; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with ABB. Found a mistake? Report an error.