Industrial

The AW-FET-053C-120 is a 4 port 10/100BaseT PoE switch capable of feeding 15.4/30W (54V max. per port) power to Power over Ethernet (PoE) devices. It comes with another 1x FE RJ45 uplink port. The switch is capable of a total of 120 Watts PoE power budget. EX mode in 802.3af (15.4W): camera connection up to 250m.

This document is the BRON V65 vibratory plow operator's manual, which introduces the installation, operation and maintenance of the vibratory plow.

This is a user manual for low-voltage servo drivers. It includes product features, product parameters, installation, debugging, operation, and troubleshooting.

XL6013 is a boost constant current LED driver, which can work in the DC5V to 40V input voltage range, with low ripple, and built-in power MOS. The built-in fixed frequency oscillator and frequency compensation circuit simplify the circuit design. When the input voltage is greater than or equal to 12V, XL6013 can drive 5 to 10 strings of 1W LED. PWM control loop can adjust the duty cycle linearly from 0 to 90%. Built-in overcurrent protection function and EN pin logic level shutdown function. The internal compensation module can reduce the number of external components.

WALLTEQ M-120 allows to process wall elements, roof elements, floor or gable elements at highest precision.

XL3001 is a buck constant current LED driver that can work in the DC8V to 40V input voltage range, low ripple, and built-in power MOS. XL3001 has a built-in fixed frequency oscillator and frequency compensation circuit to simplify circuit design. The PWM control loop can adjust the duty cycle linearly between 0~100%. Built-in output overcurrent protection, when the output is short-circuited, the switching frequency is reduced from 220KHz to 60KHz. The internal compensation module can reduce the number of peripheral components.

This is an instruction manual for the Reactor® 222 hydraulic proportioning system

This manual describes the features and use of Wright commercial mowers.

XL1192 is a chip that meets the family data bus standard and has receiving and sending data functions. Signal reception and transmission use AMI mode encoding and can be transmitted through twisted pairs. Widely used in air-conditioning equipment, security equipment, audio equipment, telephone equipment and other communication fields.

This manual describes the usage of MELSEC-Q/L series Ethernet interface modules.

This manual contains installation, use, maintenance and inspection instructions for the fixed ladder system.

This document is the user manual for GR series recorders. It mainly introduces the installation, use methods and function characteristics of the recorder.

This file is the safety instructions of Extron 4K HDMI Distribution Amplifier

Quick Start Guide, introduces the basic use of Bolt X

ZLM1 is a single zone low voltage monitor that has many features and benefits, such as multiple input/output configurations, flexible programming, an optional external keypad, an internal beeper and an internal flasher, as well as up to 1A of output current.