Industrial

The DAC8412/DAC8413 are quad, 12-bit voltage output DACs with readback capability. Built using a complementary BiCMOS process, these monolithic DACs offer the user very high package density. Output voltage swing is set by the two reference inputs VREFH and VREFL. By setting the VREFL input to 0 V and VREFH to a positive voltage, the DAC provides a unipolar positive output range. A similar configuration with VREFH at 0 V and VREFL at a negative voltage provides a unipolar negative output range. Bipolar outputs are configured by connecting both VREFH and VREFL to nonzero voltages. This method of setting output voltage range has advantages over other bipolar offsetting methods because it is not dependent on internal and external resistors with different temperature coefficients. Digital controls allow the user to load or read data.

AD7568 is an 8-bit eight-channel DAC with 4-quadrant multiplication, single +5V power supply, low power consumption, serial interface, multiple update and reset function.

The WS128K32V-XXX 128Kx32 3.3V SRAM MULTICHIP PACKAGE is a low power CMOS memory that supports a 3.3V power supply, has TTL compatible inputs and outputs, and has built-in decoupling capacitors and multiple ground pins for low noise operation.

This file introduces the features of DAC8512. DAC8512 is a 12-bit digital-to-analog converter from Analog Devices, which operates on a single +5V supply and offers low power, low cost and ease of use.

The AD7249 DACPORT is an integrated device that includes a pair of 12-bit voltage output DACs, output amplifiers, and a Zener voltage reference. It features high accuracy, no external trimming required, and compact size.

The AD660 DACPORT® is a 16-bit serial/byte monolithic digital-to-analog converter (DAC) with the following features: complete 16-bit digital-to-analog function, on-chip output amplifier, on-chip buried Zener voltage reference, ±1 LSB integral linearity, 15-bit monotonic over temperature, microprocessor compatible, serial or byte input, double-buffered latches, fast (40 ns) write pulse, asynchronous clear (to 0 V) function, serial output pin facilitates daisy-chaining, unipolar or bipolar output, low glitch: 15 nV-s, low total harmonic distortion (THD) + noise: 0.009%

This is the functional block diagram of AD8582. It is a complete dual 12-bit DAC with no external components, single +5V operation, 1 mV/Bit with 4.095 V full scale, true voltage output, ±5 mA drive, and very low power consumption: 5 mW.

The AD8842 is an 8-bit octal, 4-quadrant multiplying, CMOS TrimDAC that features low cost, replaces 8 potentiometers, 50 kHz 4-quadrant multiplying bandwidth, low zero output error, eight individual channels, 3-wire serial input, 500 kHz update data loading rate, ±3 V output swing, midscale preset, zero volts out.

The AD8600 is a 16-channel 8-bit multiplying digital-to-analog converter (DAC) with 16 independently addressable voltage output channels. The full-scale value is set by an external reference voltage and it has a settling time of 2 µs. It features double buffered 8-bit parallel input, high-speed data load rate, data readback, and can operate from a single +5 V supply or optional ±6 V supply. It is commonly used in applications such as phased array ultrasound and sonar, power level setting, receiver gain setting, automatic test equipment, and LCD clock level setting.

The AD8522 is a complete dual 12-bit, single-supply, serial input DAC. The device features serial input, single supply, low power, gain calibration and zero calibration, 12-bit resolution, 12-bit linearity, 1 ppm/°C temperature coefficient and 2.5V reference output.

The AD8300 is a complete 12-bit, voltage-output digital-to-analog converter designed to operate from a single +3 volt supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease-of-use in single-supply +3 volt systems. Operation is guaranteed over the supply voltage range of +2.7 V to +5.5 V making this device ideal for battery-operated applications. The 2.0475 V full-scale voltage output is laser trimmed to maintain accuracy.

AD7564 is a device that integrates four 12-bit DACs with features such as four-quadrant multiplication, separate reference voltage inputs, single supply operation, low power consumption, and versatile interfaces.